Complete your front door with this attractive large internal letter plate from our collection of classic plates designed to suit both modern and period properties. The internal letter plate covers the hole left by a letterbox making the door more stylish and helping to cut out draughts so it is as practical as it is decorative.
Handcrafted from high quality natural brass, this letter plate has a beautiful, weighty appearance and a quality that can only be achieved by traditional blacksmithing methods. Incorporating bevelled edging and a draught excluder flap, it has the look of a vintage find. All our letter plates are available in a selection of finishes to complement our range of door furniture.
- our external letter plates are sprung so can be used vertically.
- However, our internal letter plates do not have a spring, so are not recommended for doors with vertical letterboxes.
For more ideas see our Front Door Furniture Collections > PRODUCT INFORMATION
External Dimensions: 36cm W x 10cm H x 1.1cm D
Opening Dimensions: 29.3cm W x 5.6cm H
Flap Size: 31cm W x 9.3cm H
Distance Between Screw Holes (centre to centre): 33cm W x 7.2cm H
This internal letter plate will fit a hole of up to 9cm H x 32cm W
Finish: Antiqued Brass - a beautiful, natural finish produced by gently distressing the brass to create a soft patina that is then treated with antiquing solution to speed up the natural tarnishing process and create a lovely aged look that will darken naturally over time. To find out more about our finishes and how best to maintain them, read our
Product Finish> pages.
KNOWLEDGE BASE GUIDES
Letter Plate Guide Screw Fitting Guide How To Clean Brass & Copper HOW TO FIT THE INTERNAL LETTER PLATE
For all types of screws it is recommended you drill a pilot hole first to prevent screws from shearing off, particurly if you are using hardwood.
STEP 1
Correctly position the internal plate on the inside of your door.
STEP 2
Mark where the screws holes are to be.
STEP 3
Remove the plate and drill a pilot hole with a drill bit the same size as the screws. Use a steel screw of the same size and drive it into the hole until fully seated.
STEP 4
Remove the steel screw, position the plate correctly and screw directly to the door by hand using the 4 screws provided. If any screws need shortening, please use a hacksaw.