BREATH NEW LIFE INTO YOUR JL PRODUCTS

1. GIVE IT A GOOD CLEAN

STEP 1.

If cleaning a light in situ, make sure the electrical supply is switched off.

STEP 2.

To remove a build up of dust and dirt, use a damp, microfibre, or lint-free cloth over the surface of the product.

STEP 3.

Dip a corner of your cloth in warm water and, using a small circular motion, rub it firmly over the entire surface of the product. Wet the cloth a little more as and when needed.

STEP 4.

Use a dry corner of your cloth, or a second clean cloth to buff the product dry.

DO NOT use abrasive cloths, soaps, washing up liquids, household or brass cleaners on the brass as this will strip off the antiquing solution and leave the finish looking patchy.

2. SEND IT TO US TO BE REWIRED/REFINISHED

Rewiring

We can rewire lights for £40 per light with a single bulb holder and a further £17 for every additional bulb holder. e.g. a Double Cottage wall light would be £57.

All lights will be fully disassembled, unwired and inspected.

We will then clean and rewire the light with new lamp holder and fresh seals and fully test it for safety and functionality before sending it back to you.

Refinishing

We can return an item to its original lustre for £35 per item – plus the cost of rewiring – as we will need to strip the wiring away from the light in order to refinish it.

Please note that our refinishing costs do not include any repairs of dents and deep scratches. Minor scratches and marks will most likely be removed or obscured by the refinishing process.

Unfortunately, we are unable refinish our nickel and lacquered finishes because the cost to remove the original finish is prohibitive as we have to send the item away to be stripped in an environmentally friendly manner.

Call customer service

If you would like more advice, or wish to discuss your requirements further, please call our friendly Customer Services team on 01473 828989 or send an email to us at sales@jim-lawrence.co.uk