Grace your front door with our handsome large letter box from our collection of classic letterboxes and plates designed to suit modern and period properties. Shown above in our smart, hard wearing Matt Black, this letterbox is handmade from high quality steel that gives it a beautiful, weighty quality that can only be achieved by traditional blacksmithing methods.
Incorporating bevelled edging and a letter flap that helps to keep out the draughts, it has the look of a vintage find that is as practical as it is decorative. All
Jim Lawrence products are made using traditional metal working techniques and are hand finished to the highest standards at our Suffolk workshop.
Kindly note, our external letter plates are sprung so can be used vertically. However, our internal letter plates do not have a spring, so are not recommended for doors with vertical letterboxes. For more ideas, see our
Front Door Furniture Collections >
PRODUCT INFORMATION
The Plate Surround is 35cm W x 10cm H x 0.5cm D
Opening Dimensions: 27.7cm W x 5cm H
Maximum hole size it will cover: 30.5cm W x 9cm H
The letter flap is fitted to the plate and is 28.5cm W x 5cm H
Additional Information: An
internal letter plate and flap can be purchased separately.
Distance between centre of screw holes: 32cm
Finish: Matt Black - a classic painted finish which gives a clean uniform look to any contemporary or traditional interior. To achieve it, the paint is applied in a powder coating process that creates a smooth, hard-wearing surface that is suitable for both indoors and out. To find out more about out finishes and how best to maintain them, please read our
product finish pages..
KNOWLEDGE BASE GUIDES
Letter Plate Guide Screw Fitting Guide Caring For Painted ProductsHOW TO FIT OUR LETTER PLATES
Our external letter plates are supplied with 2 bolts that simply bolt through the door.
STEP 1
First correctly position the plate on the outside of your door
STEP 2
Mark where the bolt holes need to be.
STEP 3
Remove the plate and drill the bolt holes.
STEP 4
Reposition the plate and screw into place with the 2 bolts, washers and nuts provided.