DESCRIPTION Achieve the quintessential country cottage look to your home with our beautiful hand-forged Heavy Duty T Hinge for the perfect finish. Nothing sums up the look and feel of a period home than the classic, handcrafted metalwork that was used to adorn it. In an age when adornment was unaffordable for most, blacksmiths designed home fittings to be as pretty as they were practical, so these heavy duty hinges will not only look good on your doors, but should last a lifetime. Shown above in our beeswax finish, this 50cm Heavy Duty T hinge is made in our forge and then dipped in hot beeswax for a classic soft black finish that has been used since Tudor times. All Jim Lawrence products are made using traditional metalworking techniques that have been passed down through the generations and are hand finished to the highest standards at our Suffolk workshops. This hinge is a combination of strap and butt hinge and is thicker (6mm) than the other hinges in the range as it has been specially designed for heavier doors. Supplied with fixing screws in the same finish. Hinges sold separately. When fitting, we recommend you drill a pilot hole – or small starting hole - for each screw first. For more advice, please see our Screw Fitting Guide > PRODUCT INFORMATION Dimensions: 52W (50cm strap & 2cm butt) 15.5H (cms)Finish: Matt Black - A clean uniform finish that looks fantastic in any contemporary or traditional interior and works well with natural building materials like brick, stone, wood and plaster. To achieve it, the paint is applied with a powder coating process which creates a smooth, hard-wearing surface. For more information please see our Product Finishes > pages. KNOWLEDGE BASE GUIDES How to Care For Painted ProductsOrders Deliveries & ReturnsBespoke Service
Achieve the quintessential country cottage look to your home with our beautiful hand-forged Heavy Duty T Hinge for the perfect finish. Nothing sums up the look and feel of a period home than the classic, handcrafted metalwork that was used to adorn it. In an age when adornment was unaffordable for most, blacksmiths designed home fittings to be as pretty as they were practical, so these heavy duty hinges will not only look good on your doors, but should last a lifetime. Shown above in our beeswax finish, this 50cm Heavy Duty T hinge is made in our forge and then dipped in hot beeswax for a classic soft black finish that has been used since Tudor times. All Jim Lawrence products are made using traditional metalworking techniques that have been passed down through the generations and are hand finished to the highest standards at our Suffolk workshops. This hinge is a combination of strap and butt hinge and is thicker (6mm) than the other hinges in the range as it has been specially designed for heavier doors. Supplied with fixing screws in the same finish. Hinges sold separately. When fitting, we recommend you drill a pilot hole – or small starting hole - for each screw first. For more advice, please see our Screw Fitting Guide > PRODUCT INFORMATION Dimensions: 52W (50cm strap & 2cm butt) 15.5H (cms)Finish: Matt Black - A clean uniform finish that looks fantastic in any contemporary or traditional interior and works well with natural building materials like brick, stone, wood and plaster. To achieve it, the paint is applied with a powder coating process which creates a smooth, hard-wearing surface. For more information please see our Product Finishes > pages. KNOWLEDGE BASE GUIDES How to Care For Painted ProductsOrders Deliveries & ReturnsBespoke Service