Atkins Wall Light in Beeswax
Item No.
3331BW
Measurements
8.3W x 20.2H x 11.8D (cm)
A stunning, contemporary light with clean straight lines, the Atkins is one of our more minimalist designs, ideal for updating a room and for adding those all-important layers of light to a scheme. It is also incredibly versatile as it can be used with a selection of different shaped pendant shades to create a very different look.
Hand crafted from high grade steel and beeswaxed for a soft black look the Atkins features a deep rectangular backbox to hide the wiring and a strong top fitting shade arm. It is a fairly flush wall light and looks fabulous lighting up a bedroom, hallway or dining space where it helps to create a cosy, inviting atmosphere.
All Jim Lawrence lights are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop.
SHADES
As it sits close to the wall, the Atkins will only take shades that are up to 16cm wide. We recommend pairing your Atkins with our 13cm, 15cm and 16cm cylinder shades or our smaller straight sided oval shades.You can also try our 15cm straight sided square shades, 30cm rectangular shades and our range of half shades that have a slider to adjust the shade closer or further from the wall.
Bulb Holder: standard bayonet (BC, B22)
Recommended LED Bulb: BC GLS Classic LED Bulb
Fitting Options: can be adapted for Europe for a small additional cost on request
Shade Illustrated: Cylinder Shade in Royal Oyster Silk (sold separately)
Dimensions: 8.30W x 20.20H x 11.80D (cm)
Cleaning beeswax
Lighting your home
What style of lampshades are there?
Wall light fitting guide
Beeswax: A traditional technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives is a lovely soft black wrought iron effect which looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be rewaxed occasionally.
Hand crafted from high grade steel and beeswaxed for a soft black look the Atkins features a deep rectangular backbox to hide the wiring and a strong top fitting shade arm. It is a fairly flush wall light and looks fabulous lighting up a bedroom, hallway or dining space where it helps to create a cosy, inviting atmosphere.
All Jim Lawrence lights are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop.
SHADES
As it sits close to the wall, the Atkins will only take shades that are up to 16cm wide. We recommend pairing your Atkins with our 13cm, 15cm and 16cm cylinder shades or our smaller straight sided oval shades.You can also try our 15cm straight sided square shades, 30cm rectangular shades and our range of half shades that have a slider to adjust the shade closer or further from the wall.
Product Information
Bulb Holder: standard bayonet (BC, B22)
Recommended LED Bulb: BC GLS Classic LED Bulb
Fitting Options: can be adapted for Europe for a small additional cost on request
Shade Illustrated: Cylinder Shade in Royal Oyster Silk (sold separately)
Dimensions: 8.30W x 20.20H x 11.80D (cm)
Knowledge Base
Cleaning beeswax
Lighting your home
What style of lampshades are there?
Wall light fitting guide
Finish
Beeswax: A traditional technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives is a lovely soft black wrought iron effect which looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be rewaxed occasionally.
We also recommend…
- Our Lamarsh Wall Light for a similar cylindrical look.
- The Thorpe if you’d like your fitting to be completely hidden by a shade
Sign up to our newsletter
Description
A stunning, contemporary light with clean straight lines, the Atkins is one of our more minimalist designs, ideal for updating a room and for adding those all-important layers of light to a scheme. It is also incredibly versatile as it can be used with a selection of different shaped pendant shades to create a very different look.
Hand crafted from high grade steel and beeswaxed for a soft black look the Atkins features a deep rectangular backbox to hide the wiring and a strong top fitting shade arm. It is a fairly flush wall light and looks fabulous lighting up a bedroom, hallway or dining space where it helps to create a cosy, inviting atmosphere.
All Jim Lawrence lights are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop.
SHADES
As it sits close to the wall, the Atkins will only take shades that are up to 16cm wide. We recommend pairing your Atkins with our 13cm, 15cm and 16cm cylinder shades or our smaller straight sided oval shades.You can also try our 15cm straight sided square shades, 30cm rectangular shades and our range of half shades that have a slider to adjust the shade closer or further from the wall.
Bulb Holder: standard bayonet (BC, B22)
Recommended LED Bulb: BC GLS Classic LED Bulb
Fitting Options: can be adapted for Europe for a small additional cost on request
Shade Illustrated: Cylinder Shade in Royal Oyster Silk (sold separately)
Dimensions: 8.30W x 20.20H x 11.80D (cm)
Cleaning beeswax
Lighting your home
What style of lampshades are there?
Wall light fitting guide
Beeswax: A traditional technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives is a lovely soft black wrought iron effect which looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be rewaxed occasionally.
Hand crafted from high grade steel and beeswaxed for a soft black look the Atkins features a deep rectangular backbox to hide the wiring and a strong top fitting shade arm. It is a fairly flush wall light and looks fabulous lighting up a bedroom, hallway or dining space where it helps to create a cosy, inviting atmosphere.
All Jim Lawrence lights are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop.
SHADES
As it sits close to the wall, the Atkins will only take shades that are up to 16cm wide. We recommend pairing your Atkins with our 13cm, 15cm and 16cm cylinder shades or our smaller straight sided oval shades.You can also try our 15cm straight sided square shades, 30cm rectangular shades and our range of half shades that have a slider to adjust the shade closer or further from the wall.
Product Information
Bulb Holder: standard bayonet (BC, B22)
Recommended LED Bulb: BC GLS Classic LED Bulb
Fitting Options: can be adapted for Europe for a small additional cost on request
Shade Illustrated: Cylinder Shade in Royal Oyster Silk (sold separately)
Dimensions: 8.30W x 20.20H x 11.80D (cm)
Knowledge Base
Cleaning beeswax
Lighting your home
What style of lampshades are there?
Wall light fitting guide
Finish
Beeswax: A traditional technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives is a lovely soft black wrought iron effect which looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be rewaxed occasionally.
We also recommend…
- Our Lamarsh Wall Light for a similar cylindrical look.
- The Thorpe if you’d like your fitting to be completely hidden by a shade
Sign up to our newsletter
Specifications
| Product Finish / Material | Beeswax |
Reviews (0)
There are no reviews yet.
2 Gang Plug Socket Beeswax Hammered Plate, Black Switches
Item No.
3273BLBW
£50.30
Bannister Table Lamp in Beeswax
Item No.
3332BW
£198.30
Monkey Tail Lockable Latch (Left) in Beeswax
Item No.
5029LBW
£35.50
Groton Door Bolt in Beeswax
Item No.
573BW
£25.90