38mm Chapel Recess Bracket in Polished
Item No.
6077PO
Measurements
4W x 8H x 3D (cm)
This Recess Bracket is to be used where the pole fits into a recess and is positioned at right angles to the pole. The pole slots onto the bracket in place of a finial. Please deduct a minimum of 3mm per bracket when measuring for your pole (it is better to allow too much for the bracket than too little!).
Product Information
Made from: steel
Suitability: for use with our 38mm classic poles
Product Information
Made from: steel
Suitability: for use with our 38mm classic poles
Description
This Recess Bracket is to be used where the pole fits into a recess and is positioned at right angles to the pole. The pole slots onto the bracket in place of a finial. Please deduct a minimum of 3mm per bracket when measuring for your pole (it is better to allow too much for the bracket than too little!).
Product Information
Made from: steel
Suitability: for use with our 38mm classic poles
Product Information
Made from: steel
Suitability: for use with our 38mm classic poles
Specifications
Product Finish / Material | Polished |
Pole Diameter | 38mm |
Fitting | Bracket |
Reviews (0)
There are no reviews yet.