DESCRIPTION A stunning 3 gang rotary dimmer switch hand forged from solid natural brass and nickel plated for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel backplate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel. Jim Lawrence dimmers incorporate 120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers. Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places.Higher wattage dimmer modules are available on request. Please call our sales team for more information.For more information on our dimmers and how to fit and programme them, please read our Dimmer Switch Instruction Guide.Wallpaper illustrated: Crivelli Trellis by Farrow & BallPRODUCT INFORMATIONMinimum Back Box Depth : 35mm Dimmer module: 120w Trailing-edge V-Pro Maximum Load: 1-10 LED or halogen bulbs up to max of 120WThis switch is suitable forDimmable LED LightingGood quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)This switch is not suitable forNon-dimmable LED lightingNon-dimmable fluorescent bulbs and tubesWire-wound or toroidal transformersElectric motors (e.g. Fans)TRIAC dimmable drivers (Choose V-Com series dimmers)FINISHNickel: Our nickel lustre is created by plating solid brass with highly polished nickel then finishing it with a flash coating of chrome that will add to its durability and create a crisp, clean silvery patina to brighten your room. Nickel is a versatile finish that works well with any colourway and natural building materials such as brick, stone, plaster or woodwork.
A stunning 3 gang rotary dimmer switch hand forged from solid natural brass and nickel plated for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel backplate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel. Jim Lawrence dimmers incorporate 120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers. Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places.Higher wattage dimmer modules are available on request. Please call our sales team for more information.For more information on our dimmers and how to fit and programme them, please read our Dimmer Switch Instruction Guide.Wallpaper illustrated: Crivelli Trellis by Farrow & BallPRODUCT INFORMATIONMinimum Back Box Depth : 35mm Dimmer module: 120w Trailing-edge V-Pro Maximum Load: 1-10 LED or halogen bulbs up to max of 120WThis switch is suitable forDimmable LED LightingGood quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)This switch is not suitable forNon-dimmable LED lightingNon-dimmable fluorescent bulbs and tubesWire-wound or toroidal transformersElectric motors (e.g. Fans)TRIAC dimmable drivers (Choose V-Com series dimmers)FINISHNickel: Our nickel lustre is created by plating solid brass with highly polished nickel then finishing it with a flash coating of chrome that will add to its durability and create a crisp, clean silvery patina to brighten your room. Nickel is a versatile finish that works well with any colourway and natural building materials such as brick, stone, plaster or woodwork.