DESCRIPTION A stunning 2 gang rotary dimmer switch hand crafted from high quality forged iron and beeswaxed for a traditional look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel back plate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel. Jim Lawrence dimmers incorporate 120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers. Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places. Higher wattage dimmer modules are available on request. Please call our sales team for more information.Product Highlights:Silent operationPush on/off for 2 way lightingNo minumum loadMultiple programme settings for greater compatibilityFor more information on our dimmers and how to fit and programme them, please read our Guide to Dimmers in the Jim Lawrence Knowledge Base. Wallpaper shown: Coralie by SandersonPRODUCT INFORMATIONMinimum Back Box Depth: 35mmDimmer module: 120W Trailing-edge V-ProMaximum Load: 1-10 LED or halogen bulbs up to max of 120WFinish: Beeswax a traditional technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives is a lovely soft black wrought iron effect which looks fabulous in any traditional or contemporary interior. To find out more please read our Product Finishes and How To Clean Beeswax guides in the Knowledge Base.Suitable forDimmable LED LightingGood quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)Not suitable forNon-dimmable LED lightingNon-dimmable fluorescent bulbs and tubesWire-wound or toroidal transformersElectric motors (e.g. Fans)TRIAC dimmable drivers (Choose V-Com series dimmers)
A stunning 2 gang rotary dimmer switch hand crafted from high quality forged iron and beeswaxed for a traditional look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel back plate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel. Jim Lawrence dimmers incorporate 120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers. Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places. Higher wattage dimmer modules are available on request. Please call our sales team for more information.Product Highlights:Silent operationPush on/off for 2 way lightingNo minumum loadMultiple programme settings for greater compatibilityFor more information on our dimmers and how to fit and programme them, please read our Guide to Dimmers in the Jim Lawrence Knowledge Base. Wallpaper shown: Coralie by SandersonPRODUCT INFORMATIONMinimum Back Box Depth: 35mmDimmer module: 120W Trailing-edge V-ProMaximum Load: 1-10 LED or halogen bulbs up to max of 120WFinish: Beeswax a traditional technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives is a lovely soft black wrought iron effect which looks fabulous in any traditional or contemporary interior. To find out more please read our Product Finishes and How To Clean Beeswax guides in the Knowledge Base.Suitable forDimmable LED LightingGood quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)Not suitable forNon-dimmable LED lightingNon-dimmable fluorescent bulbs and tubesWire-wound or toroidal transformersElectric motors (e.g. Fans)TRIAC dimmable drivers (Choose V-Com series dimmers)