A beautiful 1 gang brass dolly switch on a hand forged, natural brass architrave plate that has been antiqued for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dolly (toggle) switch plates are all made with a slimline brass or steel backplate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your home, or an uneven, hammered edge for a more rustic feel.
Each switch is 20amp, 2 way which means it can be used for switching lights from either one or two places such as from the top and bottom or your stairs. If you need to switch the light on from more than 2 positions (e.g. middle of the stairs) you will need an intermediate module which can be added for a small additional cost upon request. All
Jim Lawrence products are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop.
Product Information
Minimum Back Box Depth: 35mm
Wiring: Wiring instructions for our switches and sockets can be found
here.
Additional Information: We can provide bespoke switch configurations with the same classic design upon request. Please call our sales team to discuss your requirements.
Finish
Antiqued Brass: A beautiful, natural finish produced by distressing the brass to create a soft patina that is then treated with antiquing solution to speed up the natural tarnishing process and create a lovely aged look that will darken naturally over time. To lighten the brass just buff it occasionally with a small amount of brass cleaner to return it to its original hue. To find out more about our finishes and how best to maintain them, please read our
Product Finish pages.