Rectangular shades look fabulous on lamps with a square or rectangular base as the geometric shape reflects the straight lines of the base giving your lamp a contemporary look.
We offer two styles – straight sided and sloping.

The straight sided shades can be used to fit table lamps or turned the other way round to fit a ceiling pendant.

Our sloping rectangular shades will only fit table lamps.

Both are available in 5cm increments from 26 - 46cm wide.

They are fitted with shade rings that screw onto your shade beneath the bulb

They are supplied with reducers to ensure a universal fit.

What fitting do your rectangle shades have?

Our rectangle shades are made from good quality white card that makes them self supporting.

They have a rectangle wire frame that sits at the bottom of the shade, with a second, same sized wire rectangle fitted to the top.

The shade ring - or 'gimble' - that fits the shade to your lamp base, is fixed around 4 to 6cm up from the bottom (depending on size) and is supplied with a reducer ring, as shown, that can be removed to ensure a universal fit.

What shade do I need for a ceiling light?

You can use a straight sided rectangle shade in plain or geometric patterned fabric on a lamp base or ceiling pendant.

Simply use it with the shade ring at the bottom to fit a lamp base. Or turn it upside down so the shade ring is at the top to use as a ceiling pendant.

Our sloped rectangle shades will need to be made with a pendant fitting should you wish to use it on a ceiling.

Please contact our helpful sales team to discuss your requirements

How big should my shade be?

For useful information about sizing shades for a lamp base see our Knowledge Base guide:
How to Size Shades for a Table Lamp

The width of your shade should be equal to the height of your base.

The height of your shade should be two thirds the height of your base (divide the base height by 3).

Your shade should be wider than the widest part of your base

What size do I need for a floor lamp?

For useful information on sizing shades for floor lamps, see our Knowledge Base guide:
How to Size Shades for a Floor Lamp.

Measure the height of your floor lamp from the floor to the underneath of the bulb holder.

Divide this by 4 to get the right height of your shade.

The width of the shade should be wider than the base.

How much light will be let through?

Generally, the lighter the colour and weave of the fabric, the more light the shade will allow through.

The darker and heavier the fabric, the more the light is channelled through the top and bottom of the shade.

For useful information about fabrics andtheir use as shades, see our Knowledge Base guide: Lampshades FAQs

Can I use any of your fabrics?

Yes, we can make any of our rectangle shades in any of our fabrics as a bespoke item.

Please contact our helpful customer service team to raise a quote.

Can I use my own fabric?

Yes, we can generally make any of our shades in your own fabric, we just ask that you send in a swatch first so that we can be sure it is suitable.

Fabrics with horizontal stripes do not work well on shades with sloped sides. Vertical stripes are generally ok, while fabrics with large patterns do not work well on small shades.

For more information, see our Knowledge Base Guide: Bespoke Lampshade Service

Jim Lawrence, The Ironworks
Lady Lane, Hadleigh
Suffolk, IP7 6BQ

Contact our friendly customer service team on
sales@jim-lawrence.co.uk

Speak to one of the sales team on
01473 826685
Our telephone lines are open:
Monday - Friday: 9:30am - 5pm