DESCRIPTION The Harrington is an eye catching, flush fitting wall light with a circular design that looks wonderful when paired with one of our Carlyle Half Shades to achieve a sleek, contemporary style. It is handcrafted from high quality forged iron that has been dipped in hot beeswax to give it a soft black colour with undertones of ochre and grey, that will suit both modern and traditional interiors. All Jim Lawrence lights are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop. The simplicity of the Harrington’s design lends itself to room in your home, but because it sits so close to the wall, it makes an ideal light for a narrow hallway or small bedroom where you don’t want your lights to protrude. Shades are sold separately. We recommend our Classic GLS LED Bulb is the perfect accompaniment to your light as it has the look of a heritage bulb, lights up to full strength immediately, is dimmable and has a brightness equivalent to a 60W old style bulb. We feel this light looks good with our range of Carlyle Half Shades. PRODUCT INFORMATION Bulb Holder: standard bayonet (BC, B22) Fitting Option: can be supplied with E14 (Small Edison Screw) fittings for Europe for a small additional cost upon request. Shade Illustrated: 32cm Carlyle Half Shade in Natural Isabelle Linen(sold separately) Dimensions: 17W x 29H x 7D (cm) KNOWLEDGE BASE GUIDES Shade Styles and Sizes Everything You Need To Know About Bulbs How To Clean Beeswax Products FINISH Beeswax: A traditional metalworking technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives is a lovely soft black wrought iron effect which looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be rewaxed occasionally. Kindly note, we do not recommend the beeswax finish for use in a humid environment, as it is harder to maintain and may rust. We feel Matt Black is a preferable option.
The Harrington is an eye catching, flush fitting wall light with a circular design that looks wonderful when paired with one of our Carlyle Half Shades to achieve a sleek, contemporary style. It is handcrafted from high quality forged iron that has been dipped in hot beeswax to give it a soft black colour with undertones of ochre and grey, that will suit both modern and traditional interiors. All Jim Lawrence lights are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop. The simplicity of the Harrington’s design lends itself to room in your home, but because it sits so close to the wall, it makes an ideal light for a narrow hallway or small bedroom where you don’t want your lights to protrude. Shades are sold separately. We recommend our Classic GLS LED Bulb is the perfect accompaniment to your light as it has the look of a heritage bulb, lights up to full strength immediately, is dimmable and has a brightness equivalent to a 60W old style bulb. We feel this light looks good with our range of Carlyle Half Shades. PRODUCT INFORMATION Bulb Holder: standard bayonet (BC, B22) Fitting Option: can be supplied with E14 (Small Edison Screw) fittings for Europe for a small additional cost upon request. Shade Illustrated: 32cm Carlyle Half Shade in Natural Isabelle Linen(sold separately) Dimensions: 17W x 29H x 7D (cm) KNOWLEDGE BASE GUIDES Shade Styles and Sizes Everything You Need To Know About Bulbs How To Clean Beeswax Products FINISH Beeswax: A traditional metalworking technique used since Tudor times. The metal is heated until it darkens and then dipped in natural beeswax which gives is a lovely soft black wrought iron effect which looks fabulous in any traditional or contemporary interior. As beeswax is a natural finish that reacts with the underlying metal during the forging process, it often has a subtle, slightly mottled patina with undertones of deep grey or ochre. It is not waterproof, so will need to be rewaxed occasionally. Kindly note, we do not recommend the beeswax finish for use in a humid environment, as it is harder to maintain and may rust. We feel Matt Black is a preferable option.