A stunning 3 gang rotary dimmer switch hand forged from solid natural brass and lightly antiqued for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel backplate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel.
Jim Lawrence dimmers incorporate 0-120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers.
- Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places.
- Higher wattage dimmer modules are available on request. Please call our sales team for more information.
- For more information on our dimmers and how to fit and programme them, please read our Dimmer Switch Instruction Guide
Wallpaper illustrated: Lily Leaf by Morris & Co PRODUCT INFORMATION
Minimum Back Box Depth : 35mm
Dimmer module: 0-120w Trailing-edge V-Pro
Maximum Load: 1-10 LED or halogen bulbs up to max of 120W
This switch is suitable for
- Dimmable LED Lighting
- Good quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)
This switch is not suitable for
- Non-dimmable LED lighting
- Non-dimmable fluorescent bulbs and tubes
- Wire-wound or toroidal transformers
- Electric motors (e.g. Fans)
- TRIAC dimmable drivers (Choose V-Com series dimmers)
FINISH
Antique Brass: A beautiful natural finish produced by distressing the brass to create a soft patina that is then treated with antiquing solution to speed up the natural tarnishing process and create a lovely aged look that will darken naturally over time. To find out more about our finishes and how best to maintain them, please read our
Product Finish > pages