1 Gang Steel Dolly Switch Polished Bevelled Plate

A beautiful 1 gang dolly switch hand forged from solid natural brass and lightly antiqued for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dolly (toggle) switch plates are all made with a slimline brass or steel backplate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your home, or an uneven, hammered edge for a more rustic feel. We can provide Bespoke Switch configurations with the same classic design.

All Jim Lawrence products are made using traditional metal working techniques and are hand finished to the very highest standards here at our Suffolk workshop.

PRODUCT INFORMATION

---

Minimum Back Box Depth: 35mm
FAQs: For more information about our switches please read our guide, Everything you Need to Know about Switches and Sockets.
Dimmers: To find out about our dimmers, explore out Dimmer Switch Instructions.
Wiring: Wiring instructions for our switches and sockets can be found here.
Additional Information: We can provide bespoke switch configurations with the same classic design upon request. Please call our sales team to discuss your requirements.
Wallpaper shown: 'Chiswick Grove' by Sanderson

KNOWLEDGE BASE GUIDES

---

• Everything you need to know about switches and sockets

FINISH

---

Polished: We polish our forged iron to a gunmetal/pewter finish, then seal with a lacquer. This finish is not always suitable for outdoor use, please refer to individual product descriptions for more information. Free metal swatch available on request.