Grace your front door with our handsome nickel Large Letter Plate from our collection of classic letter plates designed to suit modern and period properties. Hand cast from high quality natural brass that has been nickel plated for a clean, crisp look, it has a beautiful, weighty appearance that can only be achieved by traditional smithing methods.
Incorporating bevelled edging and a letter flap that will help to keep out draughts, it has the look of a vintage find that is as practical as it is decorative. All
Jim Lawrence products are made using traditional metal working techniques and hand finished to the highest standards at our Suffolk workshops. All our letterboxes are available in a selection of finishes to complement our range of door furniture.
Kindly note, our external letter plates are sprung so can be used vertically. However, our internal letter plates do not have a spring, so are not recommended for doors with vertical letterboxes. PRODUCT INFORMATION
The Plate Surround is 35cm W x 10cm H x 0.5cm D
Opening Dimensions: 27.7cm W x 5cm H
Maximum hole size it will cover: 30.5cm W x 9cm H
The letter flap is fitted to the plate and is 28.5cm W x 5cm H
Additional Information: An
internal letter plate and flap can be purchased separately.
Distance between centre of screw holes: 32cm
Finish: Nickel - Our nickel lustre is created by plating solid brass with highly polished nickel then finishing it with a flash coating of chrome that will add to its endurability and create a crisp, clean silvery patina that will brighten your front door. To find out more about our finishes and how best to maintain them, please read our
product finish pages.
KNOWLEDGE BASE GUIDES
Letter Plate Guide Screw Fitting Guide How To Clean Brass & CopperHOW TO FIT OUR LETTER PLATES
Our external letter plates are supplied with 2 bolts that simply bolt through the door.
STEP 1
First correctly position the plate on the outside of your door
STEP 2
Mark where the bolt holes need to be.
STEP 3
Remove the plate and drill the bolt holes.
STEP 4
Reposition the plate and screw into place with the 2 bolts, washers and nuts provided.