DESCRIPTION A stunning 4 gang rotary dimmer switch hand forged from solid natural brass and lightly antiqued for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel back plate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel. Jim Lawrence dimmers incorporate 120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers. Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places.Higher wattage dimmer modules are available on request. Please call our sales team for more information.For more information on our dimmers and how to fit and programme them, please read our Dimmer Switch Instruction Guide.Wallpaper illustrated: Osier by SandersonPRODUCT INFORMATIONMinimum Back Box Depth: 35mm Dimmer module: 120w Trailing-edge V-Pro Maximum Load: 1-10 LED or halogen bulbs up to max of 120WThis switch is suitable forDimmable LED LightingGood quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)This switch is not suitable forNon-dimmable LED lightingNon-dimmable fluorescent bulbs and tubesWire-wound or toroidal transformersElectric motors (e.g. Fans)TRIAC dimmable drivers (Choose V-Com series dimmers)FINISHAntique Brass: A beautiful natural finish produced by distressing the brass to create a soft patina that is then treated with antiquing solution to speed up the natural tarnishing process and create a lovely aged look that will darken naturally over time.
A stunning 4 gang rotary dimmer switch hand forged from solid natural brass and lightly antiqued for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel back plate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel. Jim Lawrence dimmers incorporate 120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers. Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places.Higher wattage dimmer modules are available on request. Please call our sales team for more information.For more information on our dimmers and how to fit and programme them, please read our Dimmer Switch Instruction Guide.Wallpaper illustrated: Osier by SandersonPRODUCT INFORMATIONMinimum Back Box Depth: 35mm Dimmer module: 120w Trailing-edge V-Pro Maximum Load: 1-10 LED or halogen bulbs up to max of 120WThis switch is suitable forDimmable LED LightingGood quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)This switch is not suitable forNon-dimmable LED lightingNon-dimmable fluorescent bulbs and tubesWire-wound or toroidal transformersElectric motors (e.g. Fans)TRIAC dimmable drivers (Choose V-Com series dimmers)FINISHAntique Brass: A beautiful natural finish produced by distressing the brass to create a soft patina that is then treated with antiquing solution to speed up the natural tarnishing process and create a lovely aged look that will darken naturally over time.