DESCRIPTION A stunning 2 gang rotary dimmer switch hand forged from solid natural brass and lightly antiqued for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel back plate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel. Jim Lawrence dimmers incorporate 120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers. Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places. Higher wattage dimmer modules are available on request. Please call our sales team for more information.Product Highlights:Silent operationPush on/off for 2 way lightingNo minumum loadMultiple programme settings for greater compatibilityFor more information on our dimmers and how to fit and programme them, please read our Guide to Dimmers in the Jim Lawrence Knowledge Base. Wallpaper shown: Brunnsnas by SandbergPRODUCT INFORMATIONMinimum Back Box Depth: 35mmDimmer module: 120W Trailing-edge V-ProMaximum Load: 1-10 LED or halogen bulbs up to max of 120WFinish: Antiqued Brass -beautiful, natural finish produced by distressing brass to create a soft patina that is then treated with antiquing solution to speed up the natural tarnishing process and create a lovely aged look that will darken naturally over time. To find out more, see our Product Finish pages and How To Clean Brass & Copper.Suitable forDimmable LED LightingGood quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)Not suitable forNon-dimmable LED lightingNon-dimmable fluorescent bulbs and tubesWire-wound or toroidal transformersElectric motors (e.g. Fans)TRIAC dimmable drivers (Choose V-Com series dimmers)
A stunning 2 gang rotary dimmer switch hand forged from solid natural brass and lightly antiqued for an elegant, aged look that will add a touch of contemporary style to any room in your home. Our dimmer switch plates are all made with a slimline brass or steel back plate that sits flush against the wall, with either a straight bevelled edge for a sleek, modern look to your fittings, or an uneven, hammered edge for a more rustic feel. Jim Lawrence dimmers incorporate 120w trailing edge modules that are suitable for good quality dimmable LED bulbs, incandescent bulbs and dimmable CFL bulbs. They are also compatible with good quality dimmable electronic transformers. Each dimmer switch is 2 way which means it can be used for switching lights from either one or two places. Higher wattage dimmer modules are available on request. Please call our sales team for more information.Product Highlights:Silent operationPush on/off for 2 way lightingNo minumum loadMultiple programme settings for greater compatibilityFor more information on our dimmers and how to fit and programme them, please read our Guide to Dimmers in the Jim Lawrence Knowledge Base. Wallpaper shown: Brunnsnas by SandbergPRODUCT INFORMATIONMinimum Back Box Depth: 35mmDimmer module: 120W Trailing-edge V-ProMaximum Load: 1-10 LED or halogen bulbs up to max of 120WFinish: Antiqued Brass -beautiful, natural finish produced by distressing brass to create a soft patina that is then treated with antiquing solution to speed up the natural tarnishing process and create a lovely aged look that will darken naturally over time. To find out more, see our Product Finish pages and How To Clean Brass & Copper.Suitable forDimmable LED LightingGood quality dimmable electronic low voltage transformers (including those requiring trailing-edge control)Not suitable forNon-dimmable LED lightingNon-dimmable fluorescent bulbs and tubesWire-wound or toroidal transformersElectric motors (e.g. Fans)TRIAC dimmable drivers (Choose V-Com series dimmers)